Using the Serial Cable (Model 41B)
Model 41B communicates with a PC or printer (Figure 19) through an
p
s
isolated RS-232 port. The Tester outputs data through the RS-232 port when
you press
or
The side of the optical interface connector marked "Optical
Interface RS-232-C" faces up when properly attached to the Model
41B.
Using the Configuration Screen, you can set 1.2 , 9.6 , or 19.2 KBAUD .
Other parameters are fixed as follows: 1 start bit, 8 data bits, 1 stop bit, and
no parity.
Using the Serial Cable (Model 41B)
or when you send a command from the PC.
Note
41