User Id; Saving And Startup; Camera Information; Restart - Sony XCG-C30 Technical Manual

User ID

User IDs are unique names that can be assigned to
cameras. A string that is 15 characters long can be
assigned.
Register
DeviceUserID 15 characters of your choice

Saving and Startup

The startup setting can be determined by
UserSetDefaultSelector. This is also used to check
which user set settings are currently being used.
Usage example:
Startup with the setting saved in the user set channel 3.
UserSetDefaultSelector=3
(Restart or CameraReboot command)
Check which user set settings are the current settings.
Read UserSetDefaultSelector

Camera Information

The model name of a camera or its firmware information
can be read out.
Register
DeviceVendorName
DeviceModelName
DeviceVersion
DeviceSerialNumber
DeviceManufacturerInfo Data for service
36
User ID
Parameter
Read out items
Manufacture name (SONY)
Model name
Firmware version
Serial number

Restart

The camera is rebooted.
Register
CameraReboot
Switching a CCD Driving
Clock
This is a function that reduces power consumption by
decreasing a CCD driving clock. The frame rate of the
image output becomes low.
The rate between the normal mode and the low speed
mode of the clock speed is as follows.
For example:
The frame rate of XCG-C30 in normal mode is 130 fps
and in low speed mode is 31 fps (12/50 times of the
normal mode). Operation in the low speed mode can
reduce power consumption of maximum approx. 20 %
compared to the operation in the normal mode.
(The rate changes depending on the operating
conditions.)
Normal mode
XCG-C30/C 50
XCG-C32/C 40
XCG-C130/C 50
Register Parameter
CameraSwitchPixel- Normal (0)
Clock
Low (1)
Note
To switch between the normal mode and low speed
mode, turning on/off the power supply is required. After
the mode is changed, the change is reflected by turning
on/off the power supply.
Low speed mode
12
10
12
Setting
Normal mode
Low speed mode