Specifications - Sony XCG-C30 Technical Manual

Specifications

Specifications
Pickup device Progressive scan CCD
XCG-C30/C30C/C130/C130C:
1/3 type
XCG-C32/C32C: 1/2 type
Standard video output size (horizontal/vertical)
XCG-C30/C30C/C32/C32C: 640×480
XCG-C130/C130C: 1,280×960
Frame rate XCG-C30/C30C: 130 fps
XCG-C32/C32C: 104 fps
XCG-C130/C130C: 31 fps
Lens mount C-mount
Flange focal length
17.526 mm
Video output signal
XCG-C30/C32/C130:
Mono 8 bits (default setting)/10 bits/
12 bits
XCG-C30C/C32C/C130C:
Raw 8 bits (default setting)/10 bits/
12 bits, RGB 24 bits, YUV 24 bits,
YUV 16 bits
Reference video output level
235 steps (8 bits)/3760 steps (12
bits)
Reference pedestal level
XCG-C30/C30C/C32/C32C/C130/
C130C:
16 steps (8 bits)/256 steps (12 bits)
Range of guarantee video output
XCG-C30/C30C/C32/C32C/C130/
C130C:
16 – 242 steps (8 bits)/256 – 3900
steps (12 bits)
Range of color temperature for white balance (color
camera only)
XCG-C30C/C32C/C130C:
2,400 K ~ 9,000 K
Minimum illumination
XCG-C30:
1.5 lx (gain control at +18 dB, F1.4,
shutter speed at 1/90 sec)
XCG-C32:
1.0 lx (gain control at +18 dB, F1.4,
shutter speed at 1/60 sec)
XCG-C130:
0.5 lx (gain control at +18 dB, F1.4)
XCG-C30C:
15 lx (gain control at +18 dB, F1.4,
shutter speed at 1/90 sec)
XCG-C32C/C130C:
12 lx (gain control at +18 dB, F1.4)
(only when shutter speed at 1/60 sec
for XCG-C32C)
Sensitivity XCG-C30/C32/C130:
F5.6 (gain control at 0 dB, 400 lx)
(only when shutter speed at 1/90 sec
for XCG-C30, 1/60 sec for XCG-
C32)
XCG-C30C/C32C/C130C:
F5.6 (gain control at 0 dB, 2,000 lx)
(only when shutter speed at 1/90 sec
for XCG-C30C, 1/60 sec for XCG-
C32C)
Gain 0 dB ~ 18 dB, Auto gain
Shutter speed 1/100,000sec to 2sec, automatic
shutter
γ=1 (Changeable by LUT)
Gamma
Binning (during DC IN power supply only)
XCG-C30/C32/C130:
2×1, 1×2, 2×2
XCG-C30C/C32C/C130C:
Not included
External trigger pulse condition
pulse width: Between 10µs and 2s
amplitude: DC 2 V - 24 V (DC IN
connector)
External power DC 12 V (10.5 V - 15 V): DC IN
connector
IEEE802.3af (37 V to 57 V): RJ45
connector
Power consumption
XCG-C30/C30C/C32/C32C: 3.8 W
XCG-C130/C130C: 3.4 W
Performance guarantee temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating temperature
–5 °C to +45 °C (23 °F to 113 °F)
Storage temperature
–30 °C to +60 °C (–22 °F to 140 °F)
Operating relative humidity
20% to 80% (no condensation)
Storage relative humidity
20% to 95% (no condensation)
MTBF About 6.1 years
Vibration resistance
10 G (20 Hz to 200 Hz)
Shock resistance70 G
External dimension (w/h/d)
29 × 29 × 42 mm (1
11
1 / inches) (excluding protrusions)
16
Mass About 66 g (1.9 oz)
Accessories Lens mount cap (1)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
IMPORTANT
The nameplate is located on the bottom.
3 3
/ × 1 / ×
16 16
45
Specifications