Tc/Ub (Items For Setting Up The Time Code Or User Bit) - Sony NXCAM HXR-NX70E Operating Manual

Format
See page 58.
Repair Img. DB F.
See page 103, 105.
File Number
You can select the way to assign file number
of photos.
 Series
Assigns file numbers of photos in sequence.
The file number becomes larger each time
you record a photo.
Even if the memory card is replaced with
another one, the file number is assigned in
sequence.
Reset
Assigns file numbers in sequence, following
the largest file number existing on the
recording medium.
When the memory card is replaced with
another one, the file number is assigned for
each memory card.
GB
0
TC/UB
(Items for setting up the time
code or user bit)
TC/UB Disp
See page 47.
TC Preset
See page 48.
UB Preset
See page 48.
TC Run
You can select how the time code advances.
 Rec Run
Advances the time code only during
recording. Select this setting to record the
time code continuous from the last time code
of the previous recording.
Free Run
Advances the time code regardless of
operation of your camcorder.

Notes
Even if the time code advances in the [Rec

Run] mode, the time code may not be recorded
sequentially in the following cases:
When the recording format is changed.

When the recording media is removed.
