Brother HL-L8260CDN Online User's Manual page 97
Hide thumbs
Also See for HL-L8260CDN:
- Technical reference manual (517 pages) ,
- Quick setup manual (2 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
8. Select the Authentication Method.
9. Do one of the following:
•
If you selected the [Open System] option, press [None] or [WEP].
If you selected the [WEP] option for Encryption type, enter the WEP key, and then press [OK].
•
If you selected the [Shared Key] option, enter the WEP key, and then press [OK].
•
If you selected the [WPA/WPA2-PSK] option, press [TKIP+AES] or [AES].
Enter the WPA key, and then press [OK].
Your Brother machine supports the use of the first WEP key only.
10. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother installation disc into your computer or go to your model's Downloads page on the
Brother Solutions Center at support.brother.com.
Related Information
•
Additional Methods of Configuring Your Brother Machine for a Wireless Network
•
I Cannot Complete the Wireless Network Setup Configuration
•
How to Enter Text on Your Brother Machine
•
Wireless LAN Report Error Codes
92
Advertisement
Table of Contents
