Brother HL-L8260CDN Online User's Manual page 342
Hide thumbs
Also See for HL-L8260CDN:
- Technical reference manual (517 pages) ,
- Quick setup manual (2 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
To avoid print quality problems, DO NOT touch the surface of the drum unit except the edge.
12. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.
NOTE
DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids.
13. Turn the drum unit over by holding the green handles.
14. Reinsert the toner cartridge into the new drum unit and gently pull it toward you until you hear it lock into
place. Make sure that you match the toner cartridge colour to the same colour label on the drum unit. Repeat
this for all toner cartridges.
•
BK: Black
•
C: Cyan
•
M: Magenta
•
Y: Yellow
Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
15. Make sure the green lock lever (1) is in the release position, as shown in the illustration.
BK
C
M
Y
337
Advertisement
Table of Contents
