Brother HL-L8260CDN Online User's Manual page 377

Level 3 Level 4
Wired LAN MAC Address
Set to Default
Wired Enable
WLAN TCP/IP
Setup Wizard
WLAN Assistant
WPS
WPS w/ PIN Code -
WLAN Status
MAC Address
Set to Default
WLAN Enable
Level 5 Level 6
- -
- -
- -
Boot Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server Primary
Secondary Specify the IP address of the secondary
DNS Server Primary
Secondary Specify the secondary DNS server's IP
IP Boot Tries -
APIPA -
IPv6 -
- -
- -
- -
-
Status -
Signal -
SSID -
Comm. Mode -
- -
- -
- -
Descriptions
Display the MAC address of the
machine.
Restore wired network settings of your
machine to the factory settings.
Turn the wired interface on or off.
Choose the IP method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary
WINS server.
WINS server.
Specify the primary DNS server's IP
address.
address.
Specify the number of attempts the
machine will try to obtain an IP address
when the Boot Method is set to any
setting except Static.
Allocate the IP address from the link-
local address range automatically
Enable or disable the IPv6 protocol.
Configure the wireless network settings
using the setup wizard.
Configure your wireless network
settings using the Brother installation
disc.
Configure your wireless network
settings using the one-button push
method.
Configure the wireless network settings
using WPS with a PIN code.
Display the wireless Ethernet link
status.
Display the signal condition.
Display SSID.
Display the current Communication
Mode.
Display the MAC address of the
machine.
Restore wireless network settings of
your machine to the factory settings.
Turn the wireless interface on or off.
1
.
372