Brother HL-L8260CDN Online User's Manual page 293

Error Messages
Wrong Date&Time,
contact your
administrator.
HL-L8360CDW/HL-L9310CDW
Error Messages
A device is
already connected.
Press [OK].
Authentication
error, contact
your
administrator.
Check User ID and
Password.
Connection Error
Connection Failed
File access error,
contact your
administrator.
Log Access Error
No Device
Cause
The Brother machine does not
obtain the time from the SNTP
time server.
Cause
Two mobile devices are
already connected to the Wi-Fi
Direct network when the
Brother machine is the Group
Owner (G/O).
Your authentication setting for
the Store Print Log to Network
feature is not correct.
The Kerberos Authentication
error.
The DNS server configuration
is not correct.
The Brother machine cannot
connect to the Kerberos server.
Other devices are trying to
connect to the Wi-Fi Direct
network at the same time.
The Brother machine and your
mobile device cannot
communicate during the Wi-Fi
Direct network configuration.
The Brother machine cannot
access the destination folder
for the Store Print Log to
Network feature.
In Web Based Management,
you have selected the Cancel
Print option in the Error
Detection Setting of Store
Print Log to Network.
When configuring the Wi-Fi
Direct network, the Brother
machine cannot find your
mobile device.
Action
• Make sure the settings to access the SNTP time
server are configured correctly in Web Based
Management.
Action
After the current connection between your Brother
machine and another mobile device has shut down, try to
configure the Wi-Fi Direct settings again. You can confirm
the connection status by printing the Network
Configuration Report.
• Make sure the Username and Password in
Authentication Setting are correct. If the username is
part of a domain, enter the username in one of the
following styles: user@domain or domain\user.
• Make sure the SNTP time server settings are
configured correctly so the time matches the time used
for authentication by Kerberos or NTLMv2.
Make sure you have entered a correct user name and a
password for the Kerberos server. For more information on
the Kerberos server settings, contact your network
administrator.
Contact your network administrator for the information on
the DNS server settings.
Contact your network administrator for the information on
the Kerberos server settings.
Make sure there are no other devices trying to connect to
the Wi-Fi Direct network, and then try to configure the Wi-
Fi Direct settings again.
• Move the mobile device closer to your Brother
machine.
• Move your Brother machine and the mobile device to
an obstruction-free area.
• If you are using the PIN Method of WPS, make sure
you have entered the correct PIN.
• Make sure the stored directory name is correct.
• Make sure the stored directory is write-enabled.
• Make sure the file is not locked.
Wait for about 60 seconds until this message disappears
from the LCD.
• Make sure your machine and mobile device are in the
Wi-Fi Direct mode.
• Move the mobile device closer to your Brother
machine.
• Move your Brother machine and the mobile device to
an obstruction-free area.
• If you are manually configuring the Wi-Fi Direct
network, make sure you have entered the correct
password.
288