Brother HL-L8260CDN Online User's Manual page 37

Home > Paper Handling
and Print Envelopes Using the MP Tray
Load and Print Envelopes Using the MP Tray
You can load up to ten envelopes in the MP tray.
Before loading, press the corners and sides of the envelopes to make them as flat as possible.
When you load a different size and type of paper in the tray, you must also change the Paper Size and Paper
Type settings in the machine, or on your computer.
1. Open the machine's back cover (the face up output tray).
2. Pull down the two grey levers, one on the left side and one on the right side, as shown in the illustration.
3. On the front of the machine, open the MP tray and lower it gently.
4. Pull out the MP tray support (1) and unfold the flap (2).
2
1
5. Slide the MP tray paper guides to fit the width of the envelopes that you are using.
> Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load
32