Brother HL-L8260CDN Online User's Manual page 380

Hide thumbs Also See for HL-L8260CDN:
Table of Contents

Advertisement

Home >
Machine Settings
Tables
> Feature Tables (HL-L8360CDW/HL-L9310CDW)
Feature Tables (HL-L8360CDW/HL-L9310CDW)
Related Models: HL-L8360CDW/HL-L9310CDW
(Toner)
Level 2
Level 3
(Toner) Toner Life
Test Print
Calibration
Registration -
(Wi-Fi Setup)
Level 2
(Wi-Fi Setup) TCP/IP
1
(Available after the Wi-Fi
[Web]
Level 3 Descriptions
Web
Connect the Brother machine to an Internet service.
Web services may have been added and service names may have been changed by the provider since this
document was published.
>
Change Machine Settings from the Control Panel
Level 4
Descriptions
-
View the approximate remaining toner life for each colour.
-
Print the test page.
Calibrate Initiate colour calibration to check and correct colours.
Reset
Reset the calibration parameters to the default settings.
Align the print position of each colour.
Level 3
Descriptions
Change the TCP/IP settings.
1
Setup Wizard
Configure the wireless network settings using the setup wizard.
WLAN Assistant
Configure your wireless network settings using the Brother installation
disc.
WPS
Configure your wireless network settings using the one-button push
method.
WPS w/ PIN Code
Configure the wireless network settings using WPS with a PIN code.
1
WLAN Status
Display the wireless network connection status.
1
MAC Address
Display the MAC address of the machine.
1
Set to Default
Restore wireless network settings of your machine to the factory settings.
1
WLAN Enable
Turn the wireless interface on or off.
1
®
is set up)
>
Settings and Features
375

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-l8260cdwHl-l8360cdwHl-l9310cdw

Table of Contents