Clean The Corona Wires - Brother HL-L8260CDN Online User's Manual
Hide thumbs
Also See for HL-L8260CDN:
- Technical reference manual (517 pages) ,
- Quick setup manual (2 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Home >
Routine Maintenance
Clean the Corona Wires
1. Press the front cover release button and pull open the front cover.
2. Hold the drum unit's green handle. Pull the drum unit out of the machine until it stops.
3. Hold the handle of the toner cartridge and gently push it away from you to unlock it. Pull it up and out of the
drum unit. Repeat this for all toner cartridges.
4. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left
several times. Repeat this for all the corona wires.
To avoid poor print quality, be sure to lock the green tab into the home position (1), flush left with the left
side of the drum.
5. Insert the toner cartridge into the drum unit and gently pull it toward you until you hear it lock into place. Make
sure that you match the toner cartridge colour to the same colour label on the drum unit. Repeat this for all
toner cartridges.
>
Clean the Machine
> Clean the Corona Wires
1
329
Advertisement
Table of Contents
