Kurzweil FORTE SE Musician's Manual page 64

Program Mode
The Split and Layer Functions
Layer Function
When you create a Layer in Program Mode, you are also creating a Multi with two active
Zones, each using the same keyboard range. The Program you were using in Program Mode
is used as the Program for Zone 1. After this you can choose a Program that will be used for
Zone 2.
The default Program parameter for a Layer is 130 Adagio Strings, and the default keyboard
range is C1 - G9. Use the navigation buttons to access each of the Split/Layer parameters.
Other parameters that determine the behavior of the Multi are described below. Use the
navigation buttons to access each of the Split/Layer parameters.
Once you have saved your Layer as a Multi, you can continue to add Split or Layer Zones
to the Multi until you reach the maximum number of active Zones. See below for details on
saving.
Split/Layer parameters
Zn and Stat (Zone and Status)
Selecting Split or Layer makes Zone 2 active. You can continue to add Zones to the Multi
by activating additional Zones with the Stat parameter or the front panel Zone buttons. The
Forte SE will display a message if you have already reached the maximum number of active
Zones (see
6-12
Chapter 10, for more information on Multis).