Kurzweil FORTE SE Musician's Manual page 212

Multi Mode
Split Function
When you create a Split in Multi Mode, you are in fact activating a new Zone within the
current Multi. If the current Multi already has the maximum number of active Zones and
you press the Split Function soft button, then a message will appear on the display indicating
that you have reached the maximum number of Zones. Alternatively, you can mute one of
the active Zones by using the Zone Mute buttons, and then continue to create the Split.
The Multi you were using becomes the right hand of the Split. After this you can choose a
Program that will be used in the left hand of the Split as the Program for another available
zone.
The default Program parameter for a Split is 203 Finger Bass, and the default keyboard range
is C1 - E3. These may be changed, as described below.
Other parameters that determine the behavior of the Split are described below. Use the
navigation buttons to access each of the Split/Layer parameters.
Once you have saved your Split as a Multi, you can continue to add Split or Layer Zones to
the Multi until you reach the maximum number of active Zones. See below for details on
saving.
Layer Function
When you create a Layer in Multi Mode, you are in fact activating a new Zone within
the current Multi. If the current Multi already has the maximum number of active Zones
and you press the Layer Function soft button, then a message will appear on the display
indicating that you have reached the maximum number of Zones. Alternatively, you can
mute one of the active Zones by using the Zone Mute buttons, and then continue to create
the Layer.
Choose a Program that will be used for the next available Zone. The active Zones of the
Multi you were originally using will remain unchanged.
The default Program parameter for a Layer Multi is 130 Adagio Strings,, and the default
keyboard range is C1 - G9. Use the navigation buttons to access each of the Split/Layer
parameters.
10-10