Kurzweil FORTE SE Musician's Manual page 274

NONE
LOCAL
MIDI
MIDI+LOCAL
USB
USB+LOCAL
USB+MIDI
USB+MIDI+LOCAL
If you want to play the Forte SE, but not send any MIDI information to other MIDI
instruments, then select LOCAL.
If you want to use the Forte SE strictly as a MIDI controller for the other modules in your
MIDI chain using the MIDI port, then select MIDI.
If you want to make use of the Forte SE's sounds as well as use it as a MIDI controller (MIDI
port), then select MIDI+LOCAL.
If you want to use the Forte SE strictly as a MIDI controller for the other modules in your
MIDI chain using the USB (Computer) port, then select USB.
If you want to use the Forte SE strictly as a MIDI controller for the other modules in your
MIDI chain using the MIDI port and the USB (Computer) port , then select USB+MIDI.
If you want make use of the Forte SE's sounds and use it as a MIDI controller for the other
modules in your MIDI chain using the MIDI port and the USB (Computer) port , then
select USB+MIDI+LOCAL.
CAUTION: It is possible to stop all MIDI transmission, in Multi Mode, if
the Destination parameter is set to LOCAL, and the other is set to MIDI or
USB.
Chng Multi (Change Multis)
The Change Multis parameter determines the exact timing of Multi changes when you
select a different Multi, either by a normal data entry method or via MIDI program change
commands.
Choose AllKeysUp to indicate that you want Multi changes to take place only when you've
released all currently held notes. Choose Immediate to indicate that you want such changes
to happen immediately when you select the Multi.
No MIDI data transmission from the Forte. The Forte can still receive incoming
MIDI data.
MIDI data is sent only to the Forte sound engine. MIDI Out is disabled.
MIDI data is sent only through MIDI Out. The sounds of the Forte are disabled
MIDI data is sent both to the Forte sound engine and through the MIDI Out.
MIDI data is sent only through the USB port. The sounds of the Forte are
disabled
MIDI data is sent both to the Forte sound engine and through the USB port.
MIDI data is sent both to the MIDI OUT and USB port.
MIDI data is sent to the MIDI OUT, USB port. and to the Forte sound engine.
Global Mode
MIDI Page
12-21