LED behaviors
blink as pattern 4 and
lighting
blink as pattern 4 and
lighting
blink as pattern 4 and
blink as pattern 4
blink as pattern 4 and
lighting
blink as pattern 4 and
lighting
blink as pattern 4 and
blink as pattern 4
and
blinks as pattern 1
and
blinks as pattern 1
and
blinks as pattern 1
and
blinks as pattern 1
and
blinks as pattern 1
English
Status messages
Black ink is empty in the ink cartridge.
You get good printed results with Color mode in this
–
condition.
Black ink is empty.
If you want to use both Ink cartridges, please cancel
●
the print job then press and hold
and replace with a new Black Ink cartridge.
Black ink is not inserted.
You get good printed results with Color mode in this
–
condition.
Black ink cartridge
If you want to use both Ink cartridges, please cancel
is not detected.
●
the print job then press and hold
and replace with a new Black Ink cartridge.
Black ink level is low.
You should purchase a new Ink cartridge.
Black ink level is
–
Low.
Order a new Ink cartridge from our website at
●
www.kodakverite.com
Color ink is empty in the ink cartridge.
You get good printed results with Mono mode in this
–
condition.
Color ink is empty.
If you want to use both Ink cartridges, please cancel
●
the print job then press and hold
and replace with a new Color Ink cartridge.
Color ink is not inserted.
You get good printed results with Mono mode in this
–
condition.
Color ink cartridge
If you want to use both Ink cartridges, please cancel
is not detected.
●
the print job then press and hold
and replace with a new Color Ink cartridge.
Color ink level is low.
You should purchase a new Ink cartridge.
–
Color Ink level is
Low.
Order a new Ink cartridge from our website at
●
www.kodakverite.com
Insert Paper.
Check the paper support.
Insert Paper
–
A paper jam has occurred inside of the unit.
Firmly grasp both sides of the paper, then gently pull it out.
Paper Jam
–
A paper jam has occurred during duplex printing, or the
Rear Cover (Duplex Unit) is detached.
Paper Jam.
Open the Rear Cover (Duplex Unit), then firmly grasp both
–
sides of the jammed paper and slowly pull it out.
Open rear cover.
This error occurs when there is an automatic duplex printing
–
function.
An unsupported size of paper for two-sided printing is
inserted.
Paper Size Error
Insert supported size of paper (Letter or A4).
–
Attempted to print on paper which is shorter in length
Paper Size is short.
Unit status or possible causes
(Power/Standby)
(Power/Standby)
(Power/Standby)
(Power/Standby)
than set in the Paper Settings.
62
Refer to
"Changing the ink
cartridge" on page 50.
-
-
"Changing the ink
cartridge" on page 50.
-
-
"Insert paper into the
paper support" on
page 27.
"Clearing paper jam in
the unit" on page 52.
"Clearing paper jam in
the unit" on page 52
"Specifications for
print media" on
page 27
-
Continued on next page.