LED behaviors
and
blink as pattern 1
and
blinks as pattern 1
and/or
blink as pattern 6
blinks as pattern 1
and
blink as pattern 6
blinks as pattern 1
and
blink as pattern 6
blinks as pattern 1
and/or
blink as pattern 6
blinks as pattern 1
and
blink as pattern 6
blinks as pattern 1
and
blink as pattern 4 and
blink as pattern 4
English
Status messages
Software Update failed.
If this error has occurred, visit our website at
–
www.kodakverite.com/ support for the latest
This error is
troubleshooting.
displayed when
printer is
unrecoverable.
A paper jam has occurred inside of the unit.
Firmly grasp both sides of the paper, then gently pull it out.
–
Press and hold
to turn the unit Off (Standby). Unplug the AC plug.
Paper Jam:
Wait at least 30 seconds, then reconnect the AC plug back
Unplug and replug
into the AC socket.
the power cable.
If this error occurs occasionally, visit our website at
●
www.kodakverite.com/support
troubleshooting.
If you cannot solve the problem, disconnect the AC
●
plug and contact an Authorized Service Center.
An ink cartridge is not installed correctly.
If the packaging paper is stuck in the Ink door, remove it.
–
Check cartridge
Reinstall the cartridge, then close the lid completely.
–
lock
Confirm the ink cartridge is correctly installed, then
●
press
Soiled or unsupported ink cartridge(s) has been inserted.
Clean the surface of the nozzles and contacts on the Ink
Remove and re-
–
insert both black
cartridge(s) with a dampened soft cloth then let them dry
and color ink
before reinserting cartridge(s).
cartridges.
Replace the current Ink cartridge(s) with an authorized Ink
–
cartridge(s).
The ink is empty in the ink cartridge(s).
Replace with a new Ink cartridge(s).
–
Both inks are
Order new Ink cartridge(s) from our website at
●
empty.
www.kodakverite.com
No ink detected.
Remove and reinstall the Ink cartridges.
–
Make sure the Ink cartridges are inserted correctly.
–
No Ink detected
Clean the surface of the nozzles and contacts on the Ink
–
cartridges with a dampened soft cloth then let them dry
before reinserting cartridges.
Ink cartridges error.
Clean the surface of the nozzles and contacts on the Ink
–
cartridges with a dampened soft cloth then let them dry
before reinserting cartridges.
Both Inks Error
Replace the current Ink cartridges with authorized Ink
–
cartridges.
If this error occurs occasionally, try to replace the
●
current Ink cartridges with new Ink cartridges.
Both inks are low in the ink cartridges.
You should purchase a new Ink cartridges.
–
Both ink levels are
Order new Ink cartridges from our website at
●
low.
www.kodakverite.com
Unit status or possible causes
(Power/Standby) longer than 3 seconds
for the latest
(Power/Standby).
60
Refer to
"Software update" on
page 43
"Clearing paper jam in
the unit" on page 52.
"Hard Reset" on
page 52.
"Unpack" on page 11.
"Install ink cartridges" on
page 12.
"Changing the ink
cartridge" on page 50.
"Cleaning the ink
cartridge nozzles and
contacts" on page 53.
"Changing the ink
cartridge" on page 50.
"Changing the ink
cartridge" on page 50.
"Changing the ink
cartridge" on page 50.
"Cleaning the ink
cartridge nozzles and
contacts" on page 53.
"Cleaning the ink
cartridge nozzles and
contacts" on page 53.
"Changing the ink
cartridge" on page 50.
-
Continued on next page.