Kodak VERITE 64 series Extended User Manual page 10

LED(s)
Lights up
Lights up
LED(s)
Lights up
Blinking 2
Blinking 3
Blinking 1
Blinking 7
Blinking 5
Blinking 1
Blinking 7
Blinking 8
Blinking 1
(alternate Yellow and Red)
English
Behavior
No light Indicates that ECO mode0 (ECO Off).
Indicates that ECO mode1 is ON (Save 20% ink).
Indicates that ECO mode2 is ON (Save 20% ink, page reduced 12%).
Behavior
The unit is connected to the Network using a Wireless connection.
Indicates that the unit started to connect to the Network using a Wireless connection
or WPS (Wi-Fi Protected Setup) connection.
The unit is not connected to the Network yet.
Indicates that the unit is in Easy Simple Print and there is no connection point.
Connection with Network equipment is not established yet.
Indicates that Wireless connection is Off.
No light
The unit is not connected to the Network.
Indicates that the unit is directly connected to your smartphone/tablet using Easy
Simple Print connection.
The unit is connected to the Network using Easy Simple Print.
Indicates that the Network connection has become unavailable and the unit is not
currently connected to the Network.
Indicates that the unit is in the process of the Google Cloud Print™ registration.
Proceed to Google account registration and register this unit to your Google account
by following the instructions for the Google Cloud Print™ service.
Refer to "Google Cloud Print™" on page 42.
Indicates that the unit needs confirmation to start the Google Cloud Print™ registration.
Indicates that the WPS connection failed.
The unit detected the Router, but failed to establish a connection.
Indicates a session overlap error.
The session overlap error occurred because two Routers started the Wi-Fi Protection
Setup simultaneously.
Indicates that the unit received an identification request from AirPrint.
ECO mode status
Meaning / Possible cause(s)
Network status
Meaning / Possible cause(s)
10