LED behaviors
and
blink as pattern 1
blink as pattern 6
blinks as pattern 1
blink as pattern 6
blinks as pattern1
blink as pattern 6
blinks as pattern 1
blink as pattern 6
blinks as pattern 1
blink as pattern 6
blinks as pattern 1
blink as pattern 6
blinks as pattern 1
English
Status messages
An ink cartridge is not installed correctly.
Press and hold
–
turn the unit Off (Standby).
Unplug the AC Plug.
Check that the Ink Cartridges have no obstacles and clear
pathways.
Connect the AC plug to the AC outlet.
A paper jam has occurred inside of the unit.
Cartridge/Paper
Jam:
Firmly grasp both sides of the paper, then gently pull it out.
–
Unplug and replug
Press and hold
the power cable.
to turn the unit Off (Standby). Unplug the AC Plug. Wait at
least 30 seconds, then connect the AC plug back into the AC
socket.
If this error occurs occasionally, visit our website at
●
www.kodakverite.com/support
troubleshooting.
If you cannot solve the problem, disconnect the AC
●
plug and contact an Authorized Service Center.
Soiled or unsupported ink cartridge has been inserted.
Clean the surface of the nozzles and contacts on the Ink
–
cartridge with a dampened soft cloth then let them dry before
Remove and re-
reinserting cartridge.
insert black ink
Replace the current Ink cartridge with an authorized Ink
–
cartridge.
cartridge.
If this error occurs occasionally, try to replace the
●
current Ink cartridge with a new Ink cartridge.
Black ink is empty in the ink cartridge.
Replace with a new Ink cartridge.
–
Black ink is empty.
Order a new Ink cartridge from our website at
●
www.kodakverite.com
Black ink cartridge error.
Clean the surface of the nozzles and contacts on the Ink
–
cartridge with a dampened soft cloth then let them dry before
reinserting cartridge.
Black Ink Error
Replace the current Ink cartridge with an authorized Ink
–
cartridge.
If this error occurs occasionally, try to replace the
●
current Ink cartridge with a new Ink cartridge.
Soiled or unsupported ink cartridge has been inserted.
Clean the surface of the nozzles and contacts on the Ink
–
Remove and re-
cartridge with a dampened soft cloth then let them dry before
insert color ink
reinserting cartridge.
cartridge.
Replace the current Ink cartridge with an authorized Ink
–
cartridge.
Color ink is empty in the ink cartridge.
Replace with a new Ink cartridge.
–
Color ink is empty.
Order a new Ink cartridge from our website at
●
www.kodakverite.com
Color ink cartridge error.
Clean the surface of the nozzles and contacts on the Ink
–
cartridge with a dampened soft cloth then let them dry before
reinserting cartridge.
Color Ink Error
Replace the current Ink cartridge with an authorized Ink
–
cartridge.
If this error occurs occasionally, try to replace the
●
current Ink cartridge with a new Ink cartridge.
Unit status or possible causes
(Power/Standby) longer than 3 seconds to
(Power/Standby) longer than 3 seconds
for the latest
61
Refer to
"Clearing paper jam in
the unit" on page 52.
"Fixing a paper jam" on
page 52.
"Hard Reset" on
page 52.
"Cleaning the ink
cartridge nozzles and
contacts" on page 53.
"Changing the ink
cartridge" on page 50.
"Changing the ink
cartridge" on page 50.
"Cleaning the ink
cartridge nozzles and
contacts" on page 53.
"Changing the ink
cartridge" on page 50.
"Cleaning the ink
cartridge nozzles and
contacts" on page 53.
"Changing the ink
cartridge" on page 50.
"Changing the ink
cartridge" on page 50.
"Cleaning the ink
cartridge nozzles and
contacts" on page 53.
"Changing the ink
cartridge" on page 50.
Continued on next page.