Dell S3845cdn User Manual page 450

ICA Scanner Driver Features
Scan features
Scan Mode
Kind
Resolution
Size
Orientation
Use Custom Size
Scan To
Name
Format
Image Correction
Sharpness
Sides to Scan
Reduce/Enlarge
Auto Exposure
Hide Details/Show Details
Pre-scanning the images from the printer (Preview)
Preview displays the pre-scanned image.
NOTE:
• This feature is available only with Document Glass (Flatbed) of Scan Mode.
1 Launch ICA driver user interface. A pre-scanned image will be displayed in the
preview pane.
2 Select the parameters from Scan parameters (Kind, Size, Resolution, Rotation angle,
Scan to, Name, and Format etc.) by clicking the corresponding drop-down list.
In case of Image Correction, move the slider to set the desired values.
450
|
Descriptions
Sets the source, i.e., Scan Mode to use - Document Glass (Flatbed) or
Document Feeder.
Sets whether to scan in color or in black and white.
Sets the scan resolution.
Sets the size (Standard/Custom) of scanned documents.
Sets the orientation (rotation) of text and graphics on the page.
Size - Sets the length and width of a custom size paper.
Rotation Angle - Sets the arbitrary rotation value for specified custom paper
size.
Auto Selection - Sets the dotted selector rectangle on the picture object or
overall document.
Sets the storage location for scanned images.
Sets the name of the scanned document.
Sets the file format in which scanned documents are to be saved.
Sets the image correction parameters like Brightness, Contrast etc.
Sets the sharpness to make the scanned image sharper or softer than the
original.
Sets whether to scan both sides of a document.
Sets the reduction/enlargement ratio.
Sets the background suppression level.
Sets whether to show or hide scan parameters.