Table of Contents
Advertisement
• SMB (Windows ADS)
Specify Server By
Default Server
Add Additional Server
• LDAP
For details on the LDAP settings, see "LDAP".
Convenience
Set the following Convenience Login settings:
NOTE:
• This feature requires an additional application to be developed.
Server
Alternate Login
Card Reader
Accounting Codes
Device Website Login
Method
Select the server specification method from Domain Name and Domain
Name and Host Name/IP Address.
Domain
Server Address
Clicking Add Additional Server adds the Alternate Server section to the
screen. You can set Domain and Server Address for the alternate server.
Type
IP Address : Port
Path
Select whether or not to allow users to log in without their card.
Select whether or not to disable the printer if the card reader is disconnected.
Select from Get codes automatically from server. and Users must manually
enter codes at the Device.
You can select the website login method.
Enter the domain name of the server.
NOTE:
• Use the NetBIOS or Active Directory
domain name for the domain name.
Specify the server address.
You can select the server type from IPv4 and Host
Name.
When selecting IPv4, enter the server IP address
and the port number.
When selecting Host Name, enter the host name.
NOTE:
• For IPv4, enter the address in the format
"xxx.xxx.xxx.xxx", where "xxx" is a numeric
value from 0 to 255. Do not use the
numbers assigned to the other ports.
Enter the server path.
Dell Printer Configuration Web Tool
179
|
Advertisement
Table of Contents
