Call Control Method - Samsung SMG-400 User Manual

[6] Call Control Method

Function
Procedure
You can set the signal type required to process a call.
The items in this menu have different default values for Tandem
Gateway and Standalone modes.
1. In the <PSTN Configuration Menu> screen, type '6', and press [Enter].
< < < < < Call Control Method > > > > >
+---+------------------+------+---------+---------+
| No | Digit Timer
| |
+---+------------------+------+---------+---------+
| 0 | First Digit Time
| 1 | Inter Digit Time
+---+------------------+------+---------+---------+
+---+------------------+------+---------+---------+
| No | Trunk LOOP Timer
+---+------------------+------+---------+---------+
| 2 | Loop OK Time
| 3 | OK Release Time
+---+------------------+------+---------+---------+
2. Input the number of the call control method to be changed,, and press [Enter].
Configuration Item Number:
| Value | Unit
| |
| 5 | 1 sec
| 2 | 1 sec
| Value | Unit
| 60 | 100 msec
| 80 | 100 msec
5-25
| Default |
| TNDM(STND) |
| 5(10) |
| 2(10) |
| Default |
| 60(60) |
| 80(80) |
[ . :Exit ]