Samsung SMG-400 User Manual page 78

Chapter 5
5-16
CLI (Command Line Interface)
(continued )
| 11 |
| 12 |
| 13 |
| 14 |
| 15 |
| 16 |
| 17 |
+----+------------+----++----+----------+--------+
Configuration Item Number:0 0 0 0
2. To change the operation mode of the SMG-400, type '0', and press [Enter].
Configuration Item Number: 0
3. To change the operation mode to Tandem Gateway or Standalone, press '0' or
'1' respectively, and press [Enter].
Gateway Operation Mode (0:Tandem Gateway, 1:Standalone):
Tandem Gateway ->
4. To set the PSTN Inbound LCR Option, type '1' in the above <<<<< Gateway
Operation Mode >>>>> screen and press [Enter]. It enables PSTN Inbound LCR
Option.
Configuration Item Number: 1
5. Then, select 2 to 33 as a Configuration Item Number and enter Inbound Prefix
and Maxdigit count. This value analyzes dialing digits to decide the
termination of dialing.
- Inbound Prefix : the prefix pattern of dialing digits coming into SMG-400
- Max Digit Count : The maximum number of dialing digits coming into
Configuration Item Number: 2
Inbound Prefix:
Max Digit Count : 0 ->
| 0 || 27 |
| 0 || 28 |
| 0 || 29 |
| 0 || 30 |
| 0 || 31 |
| 0 || 32 |
| 0 || 33 |
SMG-400 with the designated prefix.
->
| 0
| 0
| 0
| 0
| 0
| 0
| 0
[ . :Exit, - :Null, Enter :Skip ]
|
|
|
|
|
|
|