Names And Functions Of Parts; Main Unit - Kenwood VR-6060 Instruction Manual

Names and functions of parts

Main unit

Speaker
indicator
POWER
STANDBY STANDBY
ON/STANDBY ON/STANDBY
A SPEAKERS B
POWER
F L
ULL DIGITA
D E C O D I N G
-ON –OFF
PHONES
For VR-6060
1 POWER ON/OFF key
(For KRF-V8060D)
Use to turn the main power ON/OFF.
2 ON/STANDBY (
) key
(For KRF-V8060D)
Use to turn the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
2 POWER and ON/STANDBY (
(For VR-6060)
Use to turn the power ON/STANDBY.
STANDBY indicator
3 SPEAKERS A/B keys
Use to turn the A/B speakers ON/OFF.
4 LOUDNESS key
Use to switch the status of LOUDNESS.
5 ACTIVE EQ key
Use to switch the status of ACTIVE EQ.
6 Surround indicators
DSP indicator
Lights when the receiver is in the DSP mode.
ACTIVE EQ indicator
Lights when the receiver is in the ACTIVE EQ
mode.
CINEMA EQ indicator
Lights when the receiver is in the CINEMA
EQ mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
Standby mode
When the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by remote control unit.
6
EN
•VR609/01-09/EN new
MUTE CLIP Input mode
indicator indicator indicator
SP MUTE OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG
L C SW R
LFE
SL S SB SR
Speaker selection indicators
Input channel indicator
Output channel indicator
DSP DOLBY DIGITAL
ACTIVE EQ DTS
CINEMA EQ CS
LOUDNESS ACTIVE EQ CINEMA EQ DSP STEREO INPUT MODE DIMMER
DVD/6CH CD/DVD PHONO TUNER
VIDEO1 VIDEO2 VIDEO3 MD/TAPE
DTS indicator
¡
Lights when the receiver is in the DTS mode.
CS II indicator
Lights when the receiver is in the CIRCLE
¡
SURROUND mode.
7 CINEMA EQ key
Use to switch the status of CINEMA EQ.
8 DSP key
) key Use to select any of the DSP mode.
9 STEREO key
¡
Use to switch the status of STEREO.
0 INPUT MODE key
¢
Use to switch between the digital and analog
inputs (FULL AUTO = DIGITAL MANUAL =
ANALOG = 6CH INPUT).
∞
! DIMMER key
∞
Use to select the REC MODE.
Use to adjust the brightness of the display.
@ VOLUME CONTROL knob
⁄
# MUTE key
∞
Use to temporarily mute the sound.
$ PHONES jack
Use for headphone listening.
% Input Selector keys
∞
(DVD/6CH, CD/DVD, PHONO, TUNER,
VIDEO1, VIDEO2, VIDEO3, MD/TAPE)
⁄
Use to select input sources.
6
Listen mode
indicator
CINEMA EQ. DTS. DOLBY DIGITAL STEREO NEO:6
ACTIVE EQ. MATRIX
96kHzfs DSP MODE DISCRETE PRO LOGIC LOUDNESS CSII
Frequency display
Input display
Preset channel display
Display
Surround mode display
MULTI CONTROL
SOUND TONE SETUP
BAND AUTO MEMORY
^ SOUND key
⁄
Use to adjust the sound quality and the ambi-
⁄
ence effects.
& BAND key
Use to select the broadcast band.
* AUTO key
∞
Use to select the auto or manual tuning
⁄
mode.
( TONE key
⁄
Use to switch the status of TONE control.
) MEMORY key
9
Use to store radio stations in the preset
memory.
¡ SETUP key
Use to select the speakers' settings etc.
™ M M M M M / ? ? ? ? ? keys
§
Use for selection adjustments during TONE,
SOUND, SETUP and PRESET CHANNEL
›
functions.
£ MULTI CONTROL knob
¢
∞
Use to control a variety of settings.
¢ LISTEN MODE knob
∞
Use to select the listening mode.
∞ AV AUX (S VIDEO, VIDEO, AUDIO L/R)
¢
jacks
§ AV AUX key
Use to switch the input to AV AUX.
10/24/01, 10:33 PM
RDS
AUTO indicator
PTY
MEMO indicator
AUTO
MEMO
STEREO STEREO indicator
TUNED
TUNED indicator
VOLUME CONTROL
DOWN UP
MUTE
LISTEN MODE
AV AUX
S VIDEO VIDEO L-AUDIO-R
‹
¶
¶
∞
¶
¡
¡
¡
⁄
*
*