Recording; Recording Audio (Analog Sources); Recording Video; Recording Audio (Digital Sources) - Kenwood VR-6060 Instruction Manual

Recording

Recording audio (analog sources)

Input Selector
Recording a music source
1 Use the Input Selector keys to select the source (other than "MD/
TAPE") you want to record.
2 Set the MD or TAPE recorder to record.
3 Start playback, then start recording.

Recording video

1 Use the Input Selector keys to select the video source (other than
"VIDEO1") you want to record.
2 Set the video deck connected to VIDEO1 to record.
• Select the REC MODE to record a digital input source.
3 Start playback, then start recording.
• Recording may not be normal for some video software. This is due
to the copy guard condition.

Recording audio (digital sources)

Switch on the REC MODE to record a digital input source.
Usually use the AUTO REC MODE to record audio input sources. When
the digital mode changes during recording in the AUTO REC MODE, the
audio input source may be interrupted momentarily.
Recording music in AUTO REC MODE or MANUAL REC MODE
DIMMER
Input Selector
1 Use the Input Selector keys to select the source (CD/DVD,
DVD/6CH, VIDEO2 or VIDEO3) you want to record.
26
EN
•VR609/20-28/EN
w
26
2 Set the MD or TAPE recorder to record.
3 Press and hold the DIMMER key for more than 2 seconds to
select the AUTO REC MODE or MANUAL REC MODE.
• The mode changes every 3 seconds as shown below.
1 REC MODE OFF
: The digital input record mode is
2 AUTO REC MODE
: The digital input signals (DTS, Dolby
3 MANUAL REC MODE : The input signal type at the moment
For AUTO REC MODE :
SP MUTE OPTICAL 6CH INPUT CINEMA EQ.
AUTO DETECT
ACTIVE EQ.
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE
L C SW R
LFE
SL S SB SR
↓
SP MUTE OPTICAL 6CH INPUT CINEMA EQ.
AUTO DETECT
ACTIVE EQ.
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE
L C SW R
LFE
SL S SB SR
For MANUAL REC MODE :
SP MUTE OPTICAL 6CH INPUT CINEMA EQ.
AUTO DETECT
ACTIVE EQ.
A B CLIP
COAXIAL ANALOG 96kHzfs DSP MODE
L C SW R
LFE
SL S SB SR
↓
SP MUTE OPTICAL 6CH INPUT CINEMA EQ.
AUTO DETECT
ACTIVE EQ.
A B CLIP
DSP MODE
COAXIAL ANALOG 96kHzfs
L C SW R
LFE
SL S SB SR
4 Start playback, then start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
10/24/01, 10:37 PM
switched off.
Digital, or PCM) are identified auto-
matically and converted into stereo
signals that are ready for recording.
this mode is selected is held through-
out this mode.
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED
DTS. DOLBY DIGITAL STEREO NEO:6 RDS
THX
MATRIX
RTY
Surround EX
DISCRETE PRO LOGIC LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED