Names And Functions Of Parts; Main Unit - Kenwood KRF-X9070D Instruction Manual

Names and functions of parts

Main unit

Speaker
indicators
L
SL S
Speaker selection indicators
Input channel indicators
Output channel indicators
STANDBY
ON/STANDBY
A SPEAKERS B
POWER
-ON –OFF
PHONES
1 POWER ON/OFF key
Use to turn the main power on or off.
2 ON/STANDBY
key
Use to turn the power ON/STANDBY when
the POWER is turned on.
STANDBY indicator
3 SPEAKERS keys
Use to turn the A/B speakers on or off.
4 THX key
Use to switch the status of THX.
5 SPEAKER EQ key
Use to select SPEAKER EQ's setting.
6 Surround LED (light-emitting diode)
indicators
THX indicator
Lights when the THX mode has been chosen.
THX mode may or may not be activated
depending upon the applicable playback
mode.
SPEAKER EQ indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to
the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by remote control unit.
6
EN
CLIP Input mode
MUTE
indicator indicators
indicator
MUTE
SP OPTICAL 6CH INPUT
AUTO DETECT
A B CLIP
COAXIAL ANALOG 96kHzfs
C SW R
LFE
SB SR
THX DOLBY DIGITAL
SPEAKER EQ DTS
ACTIVE EQ CS II
THX
SPEAKER EQ ACTIVE EQ DSP STEREO INPUT MODE DIMMER
DVD/6CH CD/DVD PHONO TUNER
VIDEO 1 VIDEO 2 VIDEO 3 MD/TAPE
¡
DTS indicator
Lights when the receiver is in the DTS mode.
CS II indicator
¡
Lights when the receiver is in the CIRCLE
SURROUND II mode.
7 ACTIVE EQ key
Use to select ACTIVE EQ's setting.
¢
8 DSP key
fi Use to select any of the DSP mode.
9 STEREO key
Use to switch the listen mode to STEREO.
∞
0 INPUT MODE key
Use to switch between the full auto, digital
and analog inputs.
! DIMMER key
fl
Use to select the REC MODE.
Use to adjust the brightness of the display.
@ VOLUME CONTROL knob
# MUTE key
§
Use to temporarily mute the sound.
$ PHONES jack
Use for headphone listening.
∞
% Input Selector keys
DVD/6CH, CD/DVD, PHONO , TUNER,
fi VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE
Use to select input sources.
Listen mode
indicators
DTS DOLBY DIGITAL STEREO
MATRIX
DSP MODE DISCRETE PRO LOGIC LOUDNESS
Frequency display
Input display
Display Preset channel display
Surround mode display
MULTI CONTROL
SOUND TONE SETUP
BAND AUTO MEMORY
fi
fi
∞
fi
fl
8
¶
fl
¢
∞
§
¢
CAUTION
The power in this equipment will not be completely cut off from the
AC wall outlet when the main switch is turned OFF.
RDS indicators
NEO:6 RDS
THX
PTY
AUTO indicator
CS II Surround EX
AUTO
MEMORY indicator
MEMORY
STEREO indicator
STEREO
TUNED
TUNED indicator
VOLUME CONTROL
DOWN UP
MUTE
LISTEN MODE
AV AUX
S VIDEO VIDEO L-AUDIO-R
^ SOUND key
Use to adjust the sound quality and the
ambience effects.
& BAND key
Use to select the broadcast band.
* AUTO key
Use to select the auto or manual tuning
mode.
( TONE key
Use to switch the status of TONE control.
) MEMORY key
Use to store radio stations in the preset
memory and to start the Auto Memory.
¡ SETUP key
Use to select the speakers' settings etc.
™
keys
Use for selection adjustments during sound,
setup and preset channel functions.
£ MULTI CONTROL knob
Use to control a variety of settings.
¢ LISTEN MODE knob
Use to select the listening mode.
∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
jacks
§ AV AUX key
Use to switch the input to AV AUX.
fl
•
•
∞
ª
¡
¡
¡
fi
*
*