Specifications - Kenwood VR-6060 Instruction Manual

Specifications

For the U.S.A and Canada
AUDIO section (VR-6060)
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels driven, at
8 Ω from 20 Hz to 20 kHz with no more than 0.09% total harmonic
distortion. (FTC)
Effective power output during SURROUND operation
FRONT (20-20kHz, 0.09% T.H.D. at 8 Ω one channel driven)
.............................................................................. 100 W + 100 W
CENTER (20-20kHz, 0.09% T.H.D. at 8 Ω one channel driven)
............................................................................................. 100 W
SURROUND (20-20kHz, 0.09% T.H.D. at 8 Ω one channel
driven) .................................................................. 100 W + 100 W
SURROUND BACK/SUBWOOFER (20-20kHz, 0.09% T.H.D. at
8 Ω one channel driven) .................................................... 100 W
Total harmonic distortion ......................... 0.05% (1 kHz, 50W, 8 Ω)
Frequency response
Line (CD/DVD, TAPE, VIDEO1, VIDEO2, VIDEO3, DVD/6ch)
................................................ 20 Hz ~ 100 kHz, +0 dB - –3.0 dB
PHONO 'RIAA' responce ............... 40 Hz ~ 20 kHz, 1.5 dB - –3.0 dB
Maximum input level
PHONO (MM) ................................. 100 mV, 1% T.H.D. at 1 kHz
Signal to noise ratio (IHF'66)
PHONO (MM) ....................................................................... 75 dB
Line (CD/DVD, TAPE, VIDEO1, VIDEO2, VIDEO3, DVD/6ch)
.............................................................................................. 93 dB
Input sensitivity / impedance
PHONO (MM) ....................................................... 2.5 mV / 47 kΩ
Line (CD/DVD, TAPE, VIDEO1, VIDEO2, VIDEO3, DVD/6ch)
............................................................................. 200 mV / 47 kΩ
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 kΩ
PRE OUT (Surround Back channel) ........................... 1 V / 1 kΩ
PRE OUT (SUBWOOFER) ........................................... 1 V / 1 kΩ
Tone control
BASS ............................................................... ±10 dB (at 100 Hz)
TREBLE ........................................................... ±10 dB (at 10 kHz)
44
EN
•VR609/36-46/EN 44
Caution : Read this page carefully to ensure safe
operation.
For other countries
AUDIO section (KRF-V8060D)
Effective power output during STEREO operation
20 Hz ~ 20 kHz, 0.09% T.H.D., at 6 Ω ................... 100 W + 100 W
Rated power output during STEREO operation
100 watts per channel minimum RMS, both channels driven, at
6 Ω from 20 Hz to 20 kHz with no more than 0.09% total harmonic
distortion. (FTC)
Effective power output during SURROUND operation
FRONT (1kHz, 0.09% T.H.D. at 6 Ω one channel driven)
.............................................................................. 100 W + 100 W
CENTER (1kHz, 0.09% T.H.D. at 6 Ω one channel driven)
............................................................................................. 100 W
SURROUND (1kHz, 0.09% T.H.D. at 6 Ω one channel driven)
.............................................................................. 100 W + 100 W
Total harmonic distortion ......................... 0.05% (1 kHz, 50W, 6 Ω)
Frequency response
Line (CD/DVD, TAPE, VIDEO1, VIDEO2, VIDEO3, DVD/6ch)
.................................................. 10 Hz ~ 60 kHz, +0 dB, –3.0 dB
PHONO 'RIAA' responce ............... 40 Hz ~ 20 kHz, 1.5 dB - –3.0 dB
Maximum input level
PHONO (MM) ................................. 100 mV, 1% T.H.D. at 1 kHz
Signal to noise ratio (IHF'66)
PHONO (MM) ....................................................................... 75 dB
Line (CD/DVD, TAPE, VIDEO1, VIDEO2, VIDEO3, DVD/6ch)
.............................................................................................. 93 dB
Input sensitivity / impedance
PHONO (MM) ....................................................... 2.5 mV / 27 kΩ
Line (CD/DVD, TAPE, VIDEO1, VIDEO2, VIDEO3, DVD/6ch)
............................................................................. 200 mV / 47 kΩ
Output level / impedance
TAPE REC .............................................................. 200 mV / 1 kΩ
PRE OUT (Surround Back channel) ........................... 1 V / 1 kΩ
PRE OUT (SUBWOOFER) ........................................... 1 V / 1 kΩ
Tone control
BASS ............................................................... ±10 dB (at 100 Hz)
TREBLE ........................................................... ±10 dB (at 10 kHz)
10/24/01, 10:40 PM