Connecting To The Av Aux Jacks; Connecting The Antennas - Kenwood VR-6060 Instruction Manual

Setting up the system

Connecting to the AV AUX jacks

The AV AUX jacks are convenient for connection of video components
such as a camcorder or a video game.
S VIDEO VIDEO
S VIDEO cord
VIDEO OUT
Camcorder, other VCR,
video game, digital camera,
S VIDEO OUT
or portable MD player
• To select the source connected to the AV AUX jacks. Press the
AV AUX key.
• When you connect an audio source such as an MD player, you
do not need to connect an video cable.
• When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
18
EN
•VR609/10-19/EN new
L-AUDIO-R
AUDIO OUT
¢
18

Connecting the antennas

AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
AM antenna terminal connections
1 Push lever. 2 Insert cord.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
FM antenna terminal connections
Insert cord.
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75Ω terminal.
ANTENNA
AM
GND
75
FM
Use an antenna
adaptor
(Commercially
available)
10/24/01, 10:35 PM
3 Release lever.
Attach to the stand
AM loop antenna
FM indoor antenna
FM outdoor antenna