Names And Functions Of Parts - Kenwood VR Series Instruction Manual

VR/KRF-V SERIES (En/KM)
For VR-305, VR-306, VR-355,
and KRF-V5020 '
Frequency display,
Input display,
Preset channel display.
Surround mode display
Speaker indicator
MUTE indicator -J"
S.DIRECT indicator
AUTO indicator
MEMO, indicator
ST. indicator
I
Speaker selection indicators
Output channel indicators
TUNED indicator
MONITOR indicator
DSP indicator
3 STEREO indicator
STEREO indicator
O O
For KRF-V6020
O
POWER key -Q£]
(For U.S.A. and Canada)
Use to turn the power ON/OFF.
STANDBY indicator
O
ON/STANDBY (■/<!)) key -QB
(Except for U.S.A. and Canada)
Use to switch the power ON/STANDBY
when the POWER is turned ON.
STANDBY indicator
0 POWER key
(Except for U.S.A. and Canada)
0 DIMMER key
-W
Use to adjust the brightness of the display.
O P.CALL keys -QB
Use to call up previously registered radio
stations.
0 BAND key -QB
Use to select the broadcast band.
0 AUTO key -QB
Use to select the auto tuning mode.
0 MEMORY key -GB
Use to store radio stations in the preset
memory.
0 VOLUME CONTROL knob -QS
0 PHONES lack -QS
Use for headphone listening.
0 SPEAKERS A key (KRF-6020) -QS
Use to turn speaker system A on and off.
SPEAKERSkey
(VR-305, VR-306, VR-355, and
KRF-V5020) -BB
Use to turn the speakers on and off.
0 SPEAKERS B key (KRF-6020)
Use to turn speaker system B on and off.
MUTE key
(VR-305, VR-306, VR-355, and
KRF-V5020) -QS
Use to temporarily mute the sound.
0 BASS BOOST key -QB
Use to select the maximum adjustment
setting for the low frequency range.
0 VIDEO 2/MONITOR key -Qfi
0 SOURCE OIRECT key ~QB
• LISTEN MODE
toy -PS
Use to select the listening mode.
0 SOUND key .-3Q
Use to adjust the sound quality and ambi¬
ence effects.
0 SETUP key -Q8
Use to select the surround sound settings.
0 MULTI CONTROL knob
Used to make a variety of settings.
0 INPUT SELECTOR knob -Q0
Use to select the input sources.
About the STANDB Y indicator
This unit has a STANDBY indicator. When the STANDBY indicator is lit. the unit consumes a small amount of power to preserve the memory. This is called
STANDBY mode. This mode also lets you turn the power ON using the remote control.
I