Ivr; Create Ivr Prompt; Figure 35: Click On Prompt To Create Ivr Prompt - Grandstream Networks UCM6108 User Manual

http://arttel.ru
Timeout Repeat Loops
Invalid Repeat Loops
Key Press Event

CREATE IVR PROMPT

To record new IVR prompt or upload IVR prompt to be used in IVR, click on "Prompt" next to the "Welcome
Prompt" option and the users will be redirected to IVR Prompt page. Or users could go to Web
GUI->PBX->Internal Options->IVR Prompt page directly.
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
pressed.
Configure the number of times to repeat the prompt if no DTMF input is
detected. When the loop ends, it will go to the timeout destination if
configured, or hang up. The default setting is 3.
Configure the number of times to repeat the prompt if the DTMF input is
invalid. When the loop ends, it will go to the invalid destination if
configured, or hang up. The default setting is 3.
Select the event for each key pressing for 0-9, *, Timeout and Invalid.
The event options are:
Extension
x
Voicemail
x
Conference Rooms
x
Voicemail Group
x

IVR

x
Ring Group
x
Queues
x
Page Group
x
Fax
x
IVR Prompt
x
Hangup
x
DISA
x

Figure 35: Click On Prompt To Create IVR Prompt

UCM6100 Series IP PBX User Manual Page 88 of 159