Music On Hold - Grandstream Networks UCM6108 User Manual

Ip pbx appliance ucm6100 series
Hide thumbs Also See for UCM6108:
Table of Contents

Advertisement

http://arttel.ru

Music On Hold

Leave When Empty
Dial in Empty Queue
Dynamic Login Password
Time Out
Wrapup Time
Max Queue Length
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102
The default setting is "Ring All".
Select the Music On Hold class for the call queue.
Note:
Music On Hold classes can be managed from Web GUI->
PBX->Internal Options->Music On Hold.
Configure whether the callers will be disconnected from the queue or not
if the queue has no agent anymore. The default setting is "Strict".
Yes
x
Callers will be disconnected from the queue if all agents are paused
or invalid.
No
x
Never disconnect the callers from the queue when the queue is
empty.
Strict
x
Callers will be disconnected from the queue if all agents are paused,
invalid or unavailable.
Configure whether the callers can dial into a call queue if the queue has
no agent. The default setting is "No".
Yes
x
Callers can always dial into a call queue.
No
x
Callers cannot dial into a queue if all agents are paused or invalid.
Strict
x
Callers cannot dial into a queue if the agents are paused, invalid or
unavailable.
If enabled, the configured PIN number is required for dynamic agent to
log in. The default setting is disabled.
Configure the number of seconds an agent will ring before the call goes
to the next agent. The default setting is 15 seconds.
Configure the number of seconds before a new call can ring the queue
after the last call on the agent is completed. If set to 0, there will be no
delay between calls to the queue. The default setting is 15 seconds.
Configure the maximum number of calls to be queued at once. This
number does not include calls that have been connected with agents. It
only includes calls not connected yet. The default setting is 0, which
means unlimited. When the maximum value is reached, the caller will be
treated with busy tone followed by the next calling rule after attempting
to enter the queue.
UCM6100 Series IP PBX User Manual
Page 103 of 159

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ucm6116Ucm6102Ucm6104

Table of Contents