Pack And Ship Your Brother Machine - Brother MFC-L8610CDW User Manual

Hide thumbs Also See for MFC-L8610CDW:

Table of Contents

Routine Maintenance

Pack and Ship Your Brother Machine

To prevent possible injuries, at least two people should lift the product by holding it at the front and back.

When you move the machine, carry the machine as shown in the illustration below.

If the machine has the Optional Tray(s) installed, remove the Optional Tray(s) BEFORE moving the

machine. Attempting to move the machine without removing the Optional Tray(s) may cause injury to you

or damage to the machine.

Pack the Optional Tray(s) separately in its original carton with original packing material.

If for any reason you must ship your machine, carefully repack the machine in the original packaging to

avoid any damage during transit. The machine should be adequately insured with the carrier.

Unless you are returning the machine as part of the Brother Exchange Service, leave the toner cartridge

and drum unit inside the machine when you pack and ship it.

1. Press and hold

2. Disconnect all the cables, and then unplug the power cord from the AC power outlet.

3. Put the machine into the bag it originally came in.

4. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the

original packing material as shown. If you are returning your machine to Brother as part of the Exchange

Service, pack only the machine. Keep all separate parts and printed materials to use with your "Exchange"

> Pack and Ship Your Brother Machine

to turn off the machine. Leave the machine off for at least 10 minutes to cool down.

Mfc-l8900cdw