Brother MFC-L8900CDW Quick Setup Manual

MFC‑L8610CDW / MFC‑L8900CDW
Quick Setup Guide
Unpack the machine and check the components
Watch our Video FAQs for
help with setting up your
(Black, Cyan, Magenta and Yellow)
Brother machine:
solutions.brother.com/videos.
1
Remove the packing materials and install the drum unit and toner cartridge assembly
Remove the packing tape.
1
2
2
Load paper in the paper tray
3
Connect the power cord and turn on the machine
Back
5
Select your language (if needed)
1.
On the machine's Touchscreen,
press [Settings]* >
[All Settings] >
[Initial Setup] >
[Local Language].
2.
Press your language.
3.
Press .
Drum Unit* Waste Toner Box*
Toner Cartridges*
Telephone Line Cord
Brother Installation Disc Quick Setup Guide
3
4
Front
* [Settings] menu is MFC-L8610CDW only.
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother Solutions
Center: solutions.brother.com/manuals.
* Already installed in the machine
Belt Unit*
AC Power Cord
Product Safety Guide Reference Guide
Adjust the paper
guides.
4
Connect the telephone line cord
If you do not plan to use the fax feature on this machine, go to step
Configure the machine for faxing
6
If you do not plan to use the fax feature on this machine, go to step
NOTE:
• For more information on using the fax feature, see the Online User's Guide.
• Your machine is programmed to automatically receive faxes. To change this default mode, see the Online User's Guide.
A. Set the date and time
Press [Settings]* > [All Settings] >
[Initial Setup] > [Date & Time], and
then set the date and time you want.
NOTE:
• Manuals in Spanish for this model are available on the Brother
Solutions Center. (USA only): solutions.brother.com/manuals
Los manuales en español de este modelo están disponibles
en el Brother Solutions Center. (Solamente en los Estados
Unidos): solutions.brother.com/manuals
• The components included in the box may differ depending on
your country.
• The available connection interfaces vary depending on the
model.
• Interface cables are not included. You must purchase the
correct interface cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is
no more than 6 feet (2 meters) long.
Network cable
Use a straight-through Category 5e (or greater) twisted-
pair cable.
• The illustrations in this Quick Setup Guide show the
MFC-L8900CDW.
Do not exceed this mark.
.
B. Set the Station ID
Press [Settings]* > [All Settings] >
[Initial Setup] > [Station ID], and then
set your fax or telephone number and your name.
D00EZT001-00
USA/CAN
Version 0
.