Brother MFC-L8610CDW User Manual page 708

Level 3 Level 4
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Set to Default -
Wired Enable
(For wireless
network models)
WLAN TCP/IP
(For wireless
network models)
Setup Wizard
WLAN Assistant -
WPS
WPS w/ PIN
Code
Level 5 Level 6
APIPA -
IPv6 -
- -
- -
- -
-
- -
BOOT Method IP Boot
Tries
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS
-
Configuration
WINS Server Primary
Secondary
DNS Server Primary
Secondary
APIPA -
IPv6 -
- -
-
- -
- -
Descriptions
Set the machine to allocate the IP
address from the link-local address
range automatically.
Turn the IPv6 protocol on or off. To
use the IPv6 protocol, go to the
Brother Solutions Center at
support.brother.com for more
information.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
Restore the wired network settings to
the factory settings.
Turn the Wired LAN on or off
manually.
Select the BOOT method that best
suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
(up to 32 characters)
Select the WINS configuration mode.
Specify the IP address of the primary
WINS server.
Specify the IP address of the
secondary WINS server.
Specify the IP address of the primary
DNS server.
Specify the IP address of the
secondary DNS server.
Set the machine to allocate the IP
address from the link-local address
range automatically.
Turn the IPv6 protocol on or off. To
use the IPv6 protocol, go to the
Brother Solutions Center at
support.brother.com for more
information.
Configure the wireless network
settings using the setup wizard.
Configure your wireless network
settings using the Brother installation
disc.
Configure your wireless network
settings using the one-button push
method.
Configure your wireless network
settings using WPS with a PIN.
701