Load Paper In The Paper Tray - Brother MFC-L8610CDW User Manual

Home > Paper Handling
Tray

Load Paper in the Paper Tray

• If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears
on the LCD asking if you want to change the paper size and paper type. Change the paper size and paper
type settings if needed, following the LCD instructions.
• When you load a different size and type of paper in the tray, you must also change the Paper Size and
Paper Type settings in the machine, or on your computer.
1. Pull the paper tray completely out of the machine.
2. Press and slide the paper guides to fit the paper.
Press the green release levers to slide the paper guides.
3. Fan the stack of paper well.
4. Load paper in the paper tray with the printing surface face down.
When you use letterhead or preprinted paper, load the paper in the correct orientation.See Related
Information: Change Machine Settings to Print on Letterhead or Preprinted Paper Using the Paper Tray.
> Load Paper > Load and Print Using the Paper Tray > Load Paper in the Paper
28