Brother MFC-L8610CDW User Manual page 707

Level 3 Level 4
Auto Continue -
Output Color -
HP Tray Command -
Reset Printer -
Color Calibration
Correction
Registration
Auto Correction -
Color Settings
[All Settings] > [Network]
Level 3 Level 4
Wired LAN TCP/IP
Level 5 Descriptions
- Select if you want the machine to clear paper size
errors or media type errors automatically, and use
paper from other trays.
- Set the output color.
- Select the correct version of HP LaserJet tray
emulation.
- Restore the printer settings to the factory settings.
Calibrate Initiate color calibration to check and correct colors.
Reset Reset the calibration parameters to the default
settings.
- Align the print position of each color.
Set the machine to perform Color Calibration and
Registration automatically.
Setting Mode
Select whether to apply the color print settings of
the machine or the printer driver.
Color Mode Select the color mode.
Improve Gray Turn on or off to improve the image quality of
Color shaded areas.
Enhance Black Turn on or off if a black graphic does not print
Printing correctly.
Brightness Adjust the brightness.
Contrast Adjust the contrast.
Red Adjust the red color.
Green Adjust the green color.
Blue Adjust the blue color.
Level 5 Level 6
BOOT Method IP Boot
Tries
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server Primary
Secondary
DNS Server Primary
Secondary
Descriptions
Select the BOOT method that best
suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
(up to 32 characters)
Select the WINS configuration mode.
Specify the IP address of the primary
WINS server.
Specify the IP address of the
secondary WINS server.
Specify the IP address of the primary
DNS server.
Specify the IP address of the
secondary DNS server.
700