Discrete Graphics Board - HP ZBook 17 G4 Mobile Workstation Maintenance And Service Manual

2. The following illustration shows the replacement thermal material locations. The thermal material must
be thoroughly cleaned from the surfaces of the heat sink and the system board components each time
the heat sink is removed. Replacement thermal material is included with the heat sink and system board
spare part kits.
Thermal paste is used on the system board component (1) and on the heat sink area (2) that services it.
Reverse this procedure to install the heat sink.

Discrete graphics board

Description
NVIDIA Quadro M12000 with 4 GB graphics subsystem memory
NVIDIA Quadro M2200 with 4 GB graphics subsystem memory
NVIDIA Quadro M3000M: NVIDIA N16E-Q1 with 4 GB GDDR5 graphics subsystem memory
NVIDIA Quadro P3000 with 6 GB graphics subsystem memory
NVIDIA Quadro P4000 with 8 GB graphics subsystem memory
NVIDIA Quadro P5000 with 16 GB graphics subsystem memory
AMD Radion Pro WX 4170M with 4 GB GDDR5 graphics subsystem memory
Before removing the discrete graphics board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components: .
Spare part number
917108-001
917109-001
917109-001
917110-001
917111-001
917112-001
917107-001
Component replacement procedures 59