Heat Sink For Discrete Graphics Memory - HP Pavilion 15-bc200 Maintenance And Service Manual

Reverse this procedure to install the fan.

Heat sink for discrete graphics memory

Description
Heat sink for products with discrete graphics
For products with discrete graphics 950M/960M/965M
For products with discrete graphics GTX1050
Before removing the heat sink for discrete graphics memory, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the base enclosure (see
components:
a. Display assembly (see
b. Hard drive (see
c. SSD (see
d. Memory (see
e. WLAN module (see
f. Battery (see
46 Chapter 5 Removal and replacement procedures for authorized service provider parts
Base enclosure on page
Display assembly on page
Hard drive on page
SSD (M.2) on page 33).
Memory on page 34).
WLAN module on page
Battery on page 39).
27), and then remove the following
29).
31).
37).
Spare part number
856668-001
920563-001