Chime Mode; Using The 9 Key; Enabling The Chime; Disabling The Chime - Honeywell VISTA-128BPT User Manual

Section 20: Chime Mode
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
U s i n g t h e 9
Your system can be set to alert you when a perimeter zone, such as a door or window, is opened while it
is disarmed by using CHIME mode. When activated, three tones will sound at the Keypad whenever a
protected perimeter door or window is opened, and the Not Ready message will be displayed.
∗
Pressing the key will display the open protection points.
READY
NOTE Chime mode can be activated only when the system is disarmed.

Enabling the Chime

Press your User Code +
CHIME MODE ON

Disabling the Chime

Press your User Code +
CHIME MODE OFF
K e y
9
CHIME
The CHIME MODE ON message will appear for about 2
seconds then disappear. To display this message again (to
determine whether chime mode is on or off), simply press
and hold down the CHIME key for 5 seconds.
9
CHIME
The CHIME MODE OFF message will appear for about 2
seconds then disappears. To display this message again (to
determine whether chime mode is on or off), simply press
and hold down the CHIME key for 5 seconds.
38