Bypassing Protection Zones; Using The 6 Bypass Key; To Bypass - Honeywell VISTA-128BPT User Manual

Section 12: Bypassing Protection Zones
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
U s i n g t h e 6
This key is used to arm your system with one or more zones intentionally unprotected.
•
Bypassed zones are unprotected and will not cause an alarm when violated while your system is
armed.
•
All bypasses are removed when an OFF sequence (security code plus OFF) is performed.
NOTE: The system will not allow fire or emergency zones to be bypassed.

To Bypass

1.
Enter your Security Code +
2. Enter zone number(s) for the zones to be bypassed (e.g., 001, 002, 003, etc.).
Important!
All single-digit numbers must be preceded by "00" (for example, enter 001 for zone 1).
3. Press [∗] + [∗].
BYPASS 007 FRONT
4.
UPSTAIRS BEDROOM
Typical bypass message
5.
DISARMED BYPASS
READY TO ARM
B Y P A S S K e y
6
BYPASS
When finished, the keypad will display the word BYPASS
along with each bypassed zone number. Wait for these
zones to be displayed before arming. Arming the system
before bypassed zones are displayed eliminates all
bypasses.
Arm the system as usual when the keypad displays "ready"
to arm message.
26