Executing; Automatic Macros; Manual Macros - Honeywell VISTA-128BPT User Manual

Speed Key (Macros) (cont'd)
E x e c u t i n g
To execute a Speed Key sequence, do the following:
•
If a lettered key, A-B-C has been assigned as a Speed Key, press and hold down the appropriate
key (about 2 seconds).
•
If a user code is required for any part of the Speed Key sequence, the following prompt appears.
Otherwise, the Speed Key sequence automatically begins.

Automatic Macros

1. Press and hold the desired speed key ("A", "B", or "C").
NOTE: The "D" speed key does not support automatic macros, the macro must be
manually chosen (See below).
2. If a user code is required for any part of the speed key sequence, the following prompt
appears. Otherwise, the Speed Key sequence automatically begins.
Enter your user code.
ENTER USER CODE
∗∗∗∗

Manual Macros

To manually activate a macro NOT assigned to the "A", "B", or "C" keys:
1. Press and hold down the [D] key for 2 seconds until the following prompt appears:
2. Press and hold the "D" speed key for two seconds.
3. The following screen appears:
ENTER MACRO#
01-32
4.
Select the desired macro number and press [∗].
5. Enter your user code.
The selected speed key sequence begins.
00 = Quit
42