Security Codes and Authority Levels (cont'd)
MULTI-ACCESS ?
0 = NO , 1 = YES
GLOBAL ARM ?
0 = NO , 1 = YES
PART.2 - SHOP?
0 = NO , 1 = YES
Part. 1 A0* WHSE
User 003 Auth=3G.
If a user have access to other partitions, the keypad will prompt for
ability of this new user to access (GOTO) those partitions.
Press 0 (NO), the system activates this user code and exits "Add a
User" mode.
1 (YES), the keypad prompts for the Global Arm option for this user.
Press 1 (YES) if this user will be allowed to try to arm more than one
partition at the same time.
Press 0 if this user will arm only their assigned partition.
The keypad now prompts for the user's access to the next partition
(see GOTO command).
If yes, the system will automatically assign a user number for use in
that partition and will prompt for authority level and global arm
options for this user within the partition (see previous steps).
When all partitions have been displayed, the keypad will scroll
through the partition(s) to which access has been assigned, and
displays the user number, authority level and global arm option for
each.
NOTES
•
The "G" after the authority level indicates that the Global
Arm feature is active for this user in the displayed partition.
•
The "∗" indicates the partition from which this user can be
changed or deleted. The "." at the end of the second line
indicates that this user sends open/close reports.
•
If the Master or Manager have Open/close reporting
enabled, Open/Close is automatically active for any users
added by you.
15