Chime Mode - Honeywell LYNX Touch User Manual

Chime Mode

Your system can be set to provide you with an audible alert of the opening of a door, while it
is disarmed, by using Chime mode. When activated, three beeps will sound at the control
whenever a protected perimeter door is opened and the zone voice descriptor will be
announced, if programmed. Additionally, the faulted zone information will be displayed on
the home screen. Selecting the "Zones" icon displays the open protection points. The Chime
mode can be turned on only when the system is disarmed.
Turning Chime mode On or Off
Ready To Arm
Arm Away Arm Stay
10:18 AM June 8, 2010
Ready To Arm
Brightness
Contrast
Volume
Voice Chime
Off Off
1. With the system in the disarmed state,
Tools
Settings
Back
5000-400-056-V0
2. Select the "Chime" icon. The system will
3. Select the "Save" button to save your new
Clean
Ringer
Save
Off
5000-100-008-V1
– 31 –
SECURING THE PREMISES
select the "Settings" icon from the second
page of the Home Screen. The system
displays the Settings screen.
toggle between "Off" and "On". When "On" is
selected, the Chime mode will be active.
settings.
Chime Mode