Endress+Hauser prosonic flow 92 Technical Information

Technical Information
TI 060D/06/en
50102085
Portable Ultrasonic Flow Measuring
System
prosonic flow 92
Temporary volume flow measurement of liquids
with "Clamp On" sensors
Features and benefits
• Portable transmitter, battery operated,
for temporary measurements
• Built-in data logger with a capacity of
40000 measuring values
• Site Setup operating menus for
straightforward commissioning of up to
20 measurement sites
• "Clamp On" sensors, non-contact
measurement technique
• The sensors are affixed to the piping
from the outside
• Very wide range of nominal diameters
Sensors U DN 15...100
Sensors W DN 50...4000
• Wide temperature range of
–20...+80 °C
• Measuring transmitter in protected
handheld housing in: IP 50
• Sensors U in: IP 52
Sensors W in:
– IP 67 Sensorbody
– IP 52 BNC adapter
• Interfaces
– Data readout software for use with a
personal computer
– Current in- and outputs (4...20 mA)
Application
Ideally suited for temporary, bidirectional
measurement of pure or slightly soiled
liquids with a gas content of < 1% or a
solids content of < 5%.
• Application examples:
– Water, wastewater etc.
– Ultrapure water with low conductivity
– Process facilities
• The "Clamp On" sensors are equally
suitable for homogeneous piping as for
piping made of composite materials:
– steel, plastic, GRP and glass pipes
– Lined pipes