Installing An I/O Module; Verifying I/O Module Operation - HP storevirtual 3200 User Manual

1
3. Pull the I/O module (3) out of the enclosure using the I/O module handle.

Installing an I/O module

Procedure
1. Slide the replacement I/O module (1) into the enclosure and close the I/O module handle (2).
2. Tighten the captive retainer thumbscrew (3).
3. Reconnect all cables to the I/O module.

Verifying I/O module operation

Procedure
1. Ensure the I/O module is operating properly by checking the status LEDS. For more information, see
"Related reference".
Related reference
Storage controller enclosure controller module status LEDs on page 17
3
3
1
2
2
Installing an I/O module 59