Verifying Disk Drive Operation - HP storevirtual 3200 User Manual

Figure 32: LFF disk drive
Figure 33: SFF disk drive
4. Verify the status of the disk drive. For drive status, see Status LED descriptions.
To view the status using the management software, log on to the StoreVirtual Management Console and
navigate to the Disks section. The Health tile on the Disks Overview window displays the disk status.
IMPORTANT:
When a drive is inserted in an operational enclosure, the drive LEDs flash to indicate that the drive is
seated properly and receiving power.
5. In the StoreVirtual Management Console, select Configure RAID to add the new storage. See the HPE
StoreVirtual Online Help for more information.

Verifying disk drive operation

IMPORTANT:
When a disk drive is inserted in an operational enclosure, the drive LEDs flash to indicate that the drive
is seated properly and receiving power.
• Check the disk drive status LEDs to ensure that the drive is operating properly. For more information, see
"Related reference".
• Check the disk drive status from the StoreVirtual Management Console. Navigate to section of the Disks
StoreVirtual Management Console.
. The Health tile on the Disks Overview window displays the disk status.
Related reference
Status LED descriptions on page 15
Verifying disk drive operation 55