JETWAY J-791A User Manual page 21

Typematic Rate Setting: This determines the typematic rate.
•
Enabled: Enable typematic rate and typematic delay programming.
Disabled: Disable typematic rate and typematic delay programming. The system BIOS
will use default value of this 2 items and the default is controlled by keyboard.
Typematic Rate (Chars/Sec):
•
6 : 6 characters per second
10 : 10 characters per second
15 : 15 characters per second
24 : 24 characters per second
Typematic Delay (Msec): When holding a key, the time between the first and second
•
character displayed.
250 : 250 msec
500 : 500 msec
750 : 750 msec
1000 : 1000 msec
Security Option: This category allows you to limit access to the system and Setup, or
•
just to Setup. The default value is Setup.
System: The system will not boot and access to Setup will be denied if the correct
password is not entered at the prompt.
Setup: The system will boot, but access to Setup will be denied if the incorrect
password is entered at the prompt.
NOTE: To disable security, select PASSWORD SETTING at Main Menu and then you will be
asked to enter password. Do not type anything and just press <Enter>, it will disable
security. Once the security is disabled, the system will boot and you can enter Setup freely.
Video BIOS Shadow: It determines whether video BIOS will be copied to RAM, however,
•
it is optional from chipset design. Video Shadow will increase the video speed.
Enabled: Video shadow is enabled
Disabled: Video shadow is disabled
C8000 - CBFFF Shadow:
•
CC000 - CFFFF Shadow:
D0000 - D3FFF Shadow:
D4000 - D7FFF Shadow:
D8000 - DBFFF Shadow:
DC000 - DFFFF Shadow:
These categories determine whether optional ROM will be copied to RAM by 16K byte or
32K byte per/unit and the size depends on chipset.
Enabled: Optional shadow is enabled.
Disabled: Optional shadow is disabled.
!
8 : 8 characters per second
12 : 12 characters per second
20 : 20 characters per second
30 : 30 characters per second
20