JETWAY J-791A User Manual page 12

The PS/2 Keyboard is a 6-pin miniature DIN connector. It is for a standard PS/2 style
keyboard. May also be known as a 101 enhanced keyboard. The PS/2 Mouse connector
is a similar 6-pin, miniature DIN connector.
3. Parallel Printer Connector (26-pin block): LPT1
Connection for the included parallel port ribbon cable with mounting bracket. Connect the
ribbon cable to this connection and mount the bracket to the case on an open slot. It will
then be available for a parallel printer cable.
NOTE: Serial printers must be connected to the serial port. You can enable the parallel port and choose the
IRQ through BIOS Setup on
4. Serial port COMA and COMB Connector (Two 10-pin block): COM1, COM2
These connectors support the provided serial port ribbon cables with mounting bracket.
Connect the ribbon cables to these connectors and mount the bracket to the case on an
open slot. The two serial ports on the mounting bracket will then be used for pointing
devices or other serial devices. See
Port"
5. Floppy drive Connector (34-pin block): FDD1
!
page 25 "Onboard Parallel Port".
LPT1
Pin 1
Parallel Printer Connector
page 25
COM1
Pin 1
COM2
Pin 1
Serial port COMA and COMB Connector
PS/2 Mouse
PS/2 Keyboard
for BIOS configuration of "Onboard Serial
11