Table of Contents
Advertisement
Portal configuration commands
NOTE:
The A5500 EI Switch Series supports both Layer 2 portal authentication and Layer 3 portal authentication. The
A5500 SI Switch Series supports only Layer 2 portal authentication.
Among the A5500 Switch Series, only the A5500 EI Switch Series supports configuring and displaying VPN
instances and the relevant parameters.
display portal acl (available only on the A5500 EI)
Syntax
display portal acl { all | dynamic | static } interface interface-type interface-number [ | { begin | exclude
| include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all portal access control lists (ACLs), including dynamic and static portal ACLs.
dynamic: Displays dynamic portal ACLs—ACLs generated dynamically after a user passes portal
authentication.
static: Displays static portal ACLs—ACLs generated through portal related configuration, such as portal-
free rule configuration.
interface interface-type interface-number: Displays the ACLs on the specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display portal acl command to display the ACLs on a specified interface.
Examples
# Display all ACLs on interface VLAN-interface 2.
<Sysname> display portal acl all interface vlan-interface 2
Vlan-interface2 portal ACL rule:
Rule 0
127
Advertisement
Table of Contents
