Table of Contents
Advertisement
retry stop-accounting (RADIUS scheme view)
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
RADIUS scheme view
Default level
2: System level
Parameters
retry-times: Maximum number of stop-accounting attempts, in the range 10 to 65535.
Description
Use the retry stop-accounting command to set the maximum number of stop-accounting attempts.
Use the undo retry stop-accounting command to restore the default.
By default, the maximum number of stop-accounting attempts is 500.
NOTE:
The maximum number of stop-accounting attempts, together with some other parameters, controls how
the NAS deals with stop-accounting request packets.
Suppose that the RADIUS server response timeout period is three seconds (set with the timer response-
timeout command), the maximum number of transmission attempts is five (set with the retry command),
and the maximum number of stop-accounting attempts is 20 (set with the retry stop-accounting
command). For each stop-accounting request, if the device receives no response within three seconds, it
retransmits the request. If it receives no responses after retransmitting the request five times, it considers
the stop-accounting attempt a failure, buffers the request, and makes another stop-accounting attempt. If
20 consecutive attempts fail, the device discards the request.
Related commands: reset stop-accounting-buffer, radius scheme, and display stop-accounting-buffer.
Examples
# Set the maximum number of stop-accounting attempts to 1000 for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] retry stop-accounting 1000
secondary accounting (RADIUS scheme view)
Syntax
secondary accounting { ipv4-address [ port-number | key string | vpn-instance vpn-instance-name ] * |
ipv6 ipv6-address [ port-number | key string ] * }
undo secondary accounting [ ipv4-address | ipv6 ipv6-address ]
View
RADIUS scheme view
60
Advertisement
Table of Contents
