Port-Security Authorization Ignore - HP A5500 EI Command Reference Manual

<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1 vlan
1
MAC ADDR
000d-88f8-0577
--- 1 mac address(es) found
Table 22 Output description
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME(s)
x mac address(es) found

port-security authorization ignore

Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use the port-security authorization ignore command to configure a port to ignore the authorization
information from the RADIUS server.
Use the undo port-security authorization ignore command to restore the default.
By default, a port uses the authorization information from the RADIUS server.
After a user passes RADIUS authentication, the RADIUS server performs authorization based on the
authorization attributes configured for the user's account. For example, it may assign a VLAN.
Related commands: display port-security.
Examples
# Configure port GigabitEthernet 1/0/1 to ignore the authorization information from the RADIUS server.
<Sysname> system-view
VLAN ID STATE
1 Security
---
Description
Secure MAC address
ID of the VLAN to which the port belongs
Type of the MAC address added. "Security" means it is a secure
MAC address.
Port to which the secure MAC address belongs
Period of time before the secure MAC address ages out.
"NOAGED" is displayed for secure MAC addresses.
Number of secure MAC addresses stored
PORT INDEX
GigabitEthernet1/0/1
169
AGING TIME(s)
NOAGED